For unique tab:
Installation Tools Needed:
Installation Tools needed:
Installs in less than 10 minutes.
VIEW INSTALLATION INSTRUCTIONS
*Any modifications to your seat are done at your own risk
This product offers the following features:
This product fits:
These may fit Tahoe, Yukon, Suburban, and the HD trucks but they have not been tested. If you can confirm your front seat mounting area looks like the product pictures, then its very likely it will fit. Contact us for more info.
Hole and slot pattern designed to fit:
Installation is difficult and with wiring/plumbing can take 4+ hours.
*WARNING: Desert Does It will not be liable for any loss, damage, or injury directly or indirectly from the use or the inability to determine the use of these products. Before using or installing, the user shall determine the suitability of the products for it's intended use, and the user shall assume all responsibility and risk in connection therewith.
Under Seat Compressor Mount This option is only includes the Under Seat Compressor Mount with stainless steel hardware to bolt the compressor of choice to the mount and zip ties for wiring. You will need to source your own bulkhead fittings and any other parts to plumb the air compressor.
Under Seat Compressor Mount w/Fittings This kit includes everything from above plus: 18" of DOT 1/4" air line, two 90 degree push fittings, a female quick connect, a male quick connect, and the bulkhead fitting.
*Please note that when the MMP is installed in 4Runners and GX460/470s, trimming of trim pieces may be required.
MMP w/ Seat Jackers Includes the Multi Mount Panel and front Seat Jackers. The MMP mounts to the front of the Seat Jackers. This option will lift the front of your seat by 1.25", see separate listing for front Seat Jackers for more info. All required hardware provided.
MMP w/ Brackets Includes the Multi Mount Panel and Brackets to mount the panel to the front of your seat. This option does not impact the seat height. All required hardware provided to include longer Class 10.9 seat bolts.
MMP Only This option is available to those that have previously purchased the front Seat Jackers or Brackets. You will need either the front Seat Jackers or MMP Brackets in order to use the panel. All required hardware to mount the MMP to the front Seat Jackers or Brackets is provided.
MMP Brackets Only This option is for the Brackets only and does not include the Multi Mount Panel. Longer Class 10.9 seat bolts are provided.