No Products in the Cart
New for 2021 is our long awaited Under Seat Compressor Mount. With the help of our Seat Jackers, this mount will allow you to mount any ViAir or ARB compressor under your driver or passenger seat. A Twin ARB will fit under the passenger seat but not under the driver.
*Front and Rear Seat Jackers required. You can not fit the air compressor unless you use our Front and Rear Seat Jackers**
If you're like us and never liked the idea of mounting your compressor out in the elements, then this is for you. Our mount will allow you to have easy access to your compressor with out fumbling through your engine bay, truck bed, or rear cargo area.
Please note that when installing its important to zip tie all factory and compressor wiring under the seat away from the compressor to avoid damage.
*Will not fit 2nd Gen Tacoma driver seat, passenger seat install only.
This product fits:
*4Runners with power seats will NOT fit a Twin ARB compressor and may require slight trimming to clear the air chuck.
*Will not fit 2005 - 2015 Toyota Tacoma driver seat, passenger seat only.
This product offers the following features:
Under Seat Compressor Mount w/ Front and Rear Seat Jackers
For those that do not have our passenger seat Front and Rear Seat Jackers, this is the option you need.
Under Seat Compressor Mount w/Front and Rear Seat Jackers & Fittings
For those that do not have passenger seat Front and Rear Seat Jackers, this is the option you need. The fitting kit includes: 18" of DOT 1/4" air line, two 90 degree push fittings, quick connect, and bulkhead fitting.
Under Seat Compressor Mount - No Seat Jackers
This is for those that already have both Front and Rear Seat Jackers and just need the mount. THIS WILL NOT INSTALL OR PROVIDE CLEARANCE UNLESS YOU HAVE THE FRONT AND REAR SEAT JACKERS.
Under Seat Compressor Mount & Fittings - No Seat Jackers
This is for those that already have both Front and Rear Seat Jackers and just need to mount. The fitting kit includes: 18" of DOT 1/4" air line, two 90 degree push fittings, quick connect, and bulkhead fitting. THIS WILL NOT INSTALL OR PROVIDE CLEARANCE UNLESS YOU HAVE THE FRONT AND REAR SEAT JACKERS.
Installation is difficult and with wiring/plumbing can take 4+ hours.
VIEW INSTALLATION INSTRUCTIONS
*WARNING: Desert Does It will not be liable for any loss, damage, or injury directly or indirectly from the use or the inability to determine the use of these products. Before using or installing, the user shall determine the suitability of the products for it's intended use, and the user shall assume all responsibility and risk in connection therewith.
I already had the seat jackers on the drivers seat, so having them on the passenger seat and a place for the compressor that’s dust free was an easy decision. Great quality & design with the V2 having “DDI” cut into the mount. I have a connection installed for the ARB tank, just need more hose line.
Perfect fit. 10 minute install. What a difference they make. Seat sits totally different and so much better.
Perfect fit. 10 minute install. What a difference they make. Seat sits totally different and so much better.
Installed an ARB twin under the seat. Very easy to install. Updownair.com makes a wiring extension harness for ARB compressors for about $30 which allows the harness to reach under the passenger seat. I did deviate slightly from the written instructions, the air line can be run out from underneath the compressor instead of out through the top cover which gives more clearance under the seat.
Seat wiring harness and ARB harness run through the port underneath the carpet, I extended the opening in the carpet by cutting the existing lines more toward the door to make it easier to run the wires.
All wired and ready to bolt the seat in place. I used a braided SS line that I already had and it was longer than it needed to be so it was wrapped around the compressor and tied to the base plate.
From the rear.
From the front with the seat back.
The clearance under the seat, there really is room between the compressor and the wiring.
Installed and ready for use.
The mounting plate made it very easy to install. At some point in time I will plumb in an air tank underneath the bed so that I will be able to readily run air tools. I know this will be asked, the noise. The compressor is not quiet, not terrible but not quiet, being under the seat it does help to muffle the sound. Since I don't have lockers and am not intending to install them I'm not often going to be in the truck when the compressor is running.
I had a great experience with this order. I ordered, it came, I installed. All good!
