No Products in the Cart
New for 2020, the Front Multi-Mount Panel (MMP) is a specialized molle panel and seat riser system that mounts to the front of the driver or passenger seat. Our unique honeycomb design not only looks great but also allows you to use nylon or velco straps around the MMP. The MMP allows for quick access to frequently used tools or emergency equipment such as Flashlights, Fire Extinguishers, Handguns, Axes, Knives, or tool rolls. Mount items to the front, back or both sides of the MMP. The added Seat Jackers allow you to get comfortable while you get organized.
For the MMP w/Brackets, the 2020+ Tacomas with Power Seats may experience reduced forward seat movement. Reduced seat movement only impacts the last inch of forward movement and only when the seat is in its lowest position.
FJ Cruiser MMP w/Brackets include spacers to clear the dished seat legs. Be sure to choose the correct option.
FEATURES AND DETAILS
MMP w/ Seat Jackers
Includes the Multi Mount Panel and front Seat Jackers. The MMP mounts to the front of the Seat Jackers. This option will lift the front of your seat by 1.25", see separate listing for front Seat Jackers for more info. All required hardware provided.
MMP w/ Brackets
Includes the Multi Mount Panel and Brackets to mount the panel to the front of your seat. This option does not impact the seat height. All required hardware provided to include longer Class 10.9 seat bolts.
This option is available to those that have previously purchased the front Seat Jackers or Brackets. You will need either the front Seat Jackers or MMP Brackets in order to use the panel. All required hardware to mount the MMP to the front Seat Jackers or Brackets is provided.
MMP Brackets Only
This option is for the Brackets only and does not include the Multi Mount Panel. Longer Class 10.9 seat bolts are provided.
Hole and slot pattern designed to fit:
Installation Tools needed:
*Please note that when the MMP is installed in 4Runners and GX460/470s, removal or trimming of trim pieces may be required.
Mount install was really easy works good for multiple things example holster flashlight ect
A week after I bought my Tacoma I thought I may have made a $40k mistake because of how uncomfortable the seats were after anything more than a 20 min drive (test drives, coincidentally, usually take less time). Lower back pain, leg numbness, you name it. It was bad. I researched the issue and found seat jackers. They are a must have. Period. They should be a factory option. Or standard equipment. The truck is not only a thousand times more comfortable, but I can drive for hours without pain, soreness, or fatigue. This product is a home run. I got the MMP because i know I will find a use for it… and it’s certainly a high quality piece. But enough of that… if you find the Tacoma at all uncomfortable (like everybody apparently) then buy these.
So I was really skeptical about what these could actually do since I didn’t have a huge problem with the seats. After talking with friends who’s opinions I trust and had the seat jackers, I went ahead and bought a set. Right away you notice the difference in comfort, they’re great.
Install? Took me longer to get the tools together. I got the MMP and I like the way it looks with it more than without. And it’s useful, strapped a flashlight and a multi tool on.
The Seat Jacker quality is first rate. Easy installation. I’ll need to fine tune the seating position with spacers at the rear of the seat. Definite improvement over stock.
Instructions are clear and easy to follow, but installation for air compressor is a headache