JEEP SEAT SLAMMERS® (WRANGLER & GLADIATOR)

Seat Slammers will stop you from hitting your head on the sound bar, provide a better view of stoplights and a clear view of your instrument cluster.

Seat Slammers are made out of US sourced billet aluminum and will work on your Jeep Wrangler JL, JLU, and Jeep Gladiator. All factory seat adjustments remain 100% functional.

FITMENT:

• 2018-2025 Jeep Wrangler JL
• 2018-2025 Jeep Wrangler JLU
• 2020-2025 Jeep Gladiator
• Seat Slammers will work on Power Seats in 2024+ models so be sure to look at the updated installation instructions or reach out to us.

A few things to get out of the way:

• This is not an easily reversible mod (to revert back to stock it will require welding and fabrication)
• Requires cutting of the rear seat legs
• Each of the below kits will come with multiple shims to allow the rear to be adjusted in .25 inch increments.
• Each of the below kits will come with a Cut & Drill Fixture (doubles as a bottle opener) to insure the cut and the holes are in the correct place (seats are expensive to mess up).
• On 2 Door JL, if you do the full 2" Drop and pump the seat to its lowest position, the seat track will hit the B Pillar if you slide the seat all the way back.
• If these are deal breakers, you can check out our front Fixed Seat Jackers® and Shorty Seat Jackers®

OPTION 1 KIT:  This kit is user adjustable in .25" increments from .5" to 1.5" of rear drop. In order to drop the rear of the seat by 1.5", it is recommended the front of the seat is lifted by .25". All required parts are included in this kit.

OPTION 2 KIT:  This is the ultimate kit and user adjustable in .25" increments from .5" to 2" of rear drop. In order to drop the rear of the seat by 2," it is recommended the front of the seat is lifted by .75". All required parts are included in this kit.

Both kits will require the rear legs of your front seat to be cut. Since the rear seat legs will need to be cut, we recommend both kits be installed by a professional.

Each kit is for one seat only, if you want to slam the driver and passenger seat, you will need two kits. Passenger side will require ground stud to be relocated or "massaged" out of the way.

• If you are installing on a GLADIATOR/JT, you will need a special E12/ETorx Socket to remove factory bolts. This is not included in your jeep tool kit but can be purchased at most Auto Parts stores/Home Depot.

• If your inseam is 28" to 34", we suggest the Shorty Seat Jackers® that lift the front of seat by .75 inches. The contoured Shorty Seat Jackers are compatible with the Contoured MMP.

• If your inseam is 36"-38", we suggest the Fixed Front Seat Jackers® that lift the front of the seat by 1.25 inches. The Fixed Seat Jackers are compatible with the Seat Jacker MMP.

• If you're over 6'-2" and willing to do whatever it takes to fit in your Jeep, you might find our Seat Slammers do the trick. These are not for the faint of heart as they require cutting off the rear of your seat legs but they will stop you from hitting your head on the sound bar, provide a better view of stoplights and a clear view of your instrument cluster.

Any modifications to your vehicle are done at your own risk.

VIEW INSTALLATION INSTRUCTIONS