For unique tab:
Installation Tools needed:
Installs in less than 10 minutes.
Any modifications to your vehicle are done at your own risk.
VIEW INSTALLATION INSTRUCTIONS
*Any modifications to your seat are done at your own risk
Any modifications to your seat are done at your own risk
This product offers the following features:
This product fits:
Hole and slot pattern designed to fit:
*We have not confirmed fitment on the Jeep JK 2 Door.
*Please note that plastic trim may need to be trimmed.
*Please note depending on trim package, the plastic trim pieces may need to be removed or modified
Depending on trim level, you may need to cut plastic at seat base:
The bracket nearest the transmission tunnel will raise the seat by up to .187".
These may fit Tahoe, Yukon, Suburban, and the HD trucks but they have not been tested. If you can confirm your front seat mounting area looks like the product pictures, then its very likely it will fit. Contact us for more info.
*Please note that when the MMP is installed in 4Runners and GX460/470s, removal or trimming of trim pieces may be required.
MMP w/ Seat Jackers
Includes the Multi Mount Panel and front Seat Jackers. The MMP mounts to the front of the Seat Jackers. This option will lift the front of your seat by 1.25", see separate listing for front Seat Jackers for more info. All required hardware provided.
MMP w/ Brackets
Includes the Multi Mount Panel and Brackets to mount the panel to the front of your seat. This option does not impact the seat height. All required hardware provided to include longer Class 10.9 seat bolts.
This option is available to those that have previously purchased the front Seat Jackers or Brackets. You will need either the front Seat Jackers or MMP Brackets in order to use the panel. All required hardware to mount the MMP to the front Seat Jackers or Brackets is provided.
MMP Brackets Only
This option is for the Brackets only and does not include the Multi Mount Panel. Longer Class 10.9 seat bolts are provided.
Installation Tools Needed: