Nissan Titan/Armada/Frontier MMP Installation 2004 - 2015 Titan 2004 - 2016 Armada

INSTALL INFO

FITS

2004-2015 Nissan Titan

2004-2016 Nissan Armada

DIFFICULTY

Tools Needed

Ratchet and 14mm Socket
4mm and 8mm Allen Key and Socket
Blue Loctite
Torque Wrench

Included Parts

2 - M6 x 12mm - Button Head - SS
2 - M10 1.25 x 30mm - Socket Head - Blk
2 - Brackets (Sku 7302)
1 - MMP (Sku 7303)

IMPORTANT NOTES

Desert Does It will not be liable for any loss, damage, or injury directly or indirectly from the use or the inability to determine the use of these products. Before using or installing, the user shall determine the suitability of the products for its intended use, and the user shall assume all responsibility and risk in connection therewith. Any modifications to your vehicle are done at your own risk.

INSTALLATION INSTRUCTIONS

Installation Instructions:

General Note: To help prevent cross threading during installation, we recommend verifying bolts and threads by taking the applicable bolts and threading them in by hand to the corresponding hole.

Step One: When applicable, remove bolt trim pieces at the seat base with a pry tool or screwdriver.

Step Two: Slide the seat all the way back and remove both front factory seat base bolts (See Tools Needed above).

Step Three: With the STAINLESS STEEL hardware, loosely mount the panel to the MMP brackets.

Step Four: With blue Loctite, thread the two new BLACK socket head bolts through each MMP Bracket through the seat rail and into the threaded hole in the floor. The BLACK socket head bolts only need to be hand tightened at this time.

Step Five: Align panel and torque the two socket head bolts to 30 ft-lbs and the two stainless steel bolts to 5 ft-lbs.

SHOPPING CART

title