• Home to the ORIGINAL Seat Jackers
  • Lifetime Guarantee
  • FAST & FREE shipping (USA)

Nissan Multi Mount Panel (2016+ Titan / 2017+ Armada / 2022+ Frontier)



  • 2016+ Nissan Titan
  • 2017+ Nissan Armada
  • 2022+ Nissan Frontier


Tools Needed

  • Ratchet and 14mm Socket
  • 5mm and 8mm Allen Key and Socket
  • Blue Loctite
  • Torque Wrench

Included Parts

  • 2 - M8 x 16mm Button Head Bolts
  • 2 - M10 1.25 x 30mm Socket Head Bolts
  • 2 - MMP Brackets
  • 1 - MMP


Desert Does It will not be liable for any loss, damage, or injury directly or indirectly from the use or the inability to determine the use of these products. Before using or installing, the user shall determine the suitability of the products for its intended use, and the user shall assume all responsibility and risk in connection therewith. Any modifications to your vehicle are done at your own risk.


General Note: To help prevent cross threading during installation, we recommend verifying bolts and threads by taking the applicable bolts and threading them in by hand to the corresponding hole.

  • Step One: When applicable, remove bolt trim pieces at the seat base with a pry tool or screwdriver.
  • Step Two: Slide the seat all the way back and remove both front factory seat base bolts (See Tools Needed above).
  • Step Three: With the STAINLESS STEEL hardware, loosely mount the panel to the MMP brackets.
  • Step Four: With blue Loctite, thread the two new BLACK socket head bolts through each MMP Bracket through the seat rail and into the threaded hole in the floor. The BLACK socket head bolts only need to be hand tightened at this time.
  • Step Five: Align panel and torque the two socket head bolts to 30ft-lbs and the two stainless steel bolts to 15ft-lbs.