Quick Drop Fire Extinguisher Mount

*2020 Patent Pending*
2005-2020 Tacoma, 2003-2020 4Runner, 2006-2014 FJ
Any modifications to your vehicle are done at your own risk.

Installation Instructions

 

Tools Needed:

  • 2.5mm and 4mm Allen Key or Socket

Assembly Instructions:

  • Step One: Clean the inside face of each aluminum C bracket with the provided alcohol wipe.
  • Step Two 3” QDM with 3” Diameter Fire Extinguisher: Take the 1/8” thick black foam (thinner black foam), remove backing and install on the inside face of each of the four aluminum C brackets. Be careful not of overlap the hinge or pin portions of the bracket.
  • Step Two 3” QDM with 2.9” Diameter Fire Extinguisher: Take the 1/4” thick black foam (thicker black foam), remove backing and install on the inside face of each of the four aluminum C brackets. Be careful not of overlap the hinge or pin portions of the bracket.
  • Step Two 2-5/8” QDM: Take the provided black foam, remove backing and install on the inside face of each of the four aluminum C brackets. Be careful not of overlap the hinge or pin portions of the bracket.
  • Step Three: Take two of the flathead bolts and thread them through each C bracket into the flat mount. Be sure the C Brackets unhinge in the same direction. Tighten down with 2.5mm Allen Key but be careful not to over torque. Repeat this on the other C bracket.

    Installation Instructions:

    • Step One:  With at least two bolts, find the preferred mounting position of the fire extinguisher. Be sure the brackets have full movement and allow the extinguisher to be removed once the 4” SS Pin has been removed.
    • Step Two:  Thread the four buttonhead bolts through the Desert Does It MMP into the Quick Drop Mount (QDP) and torque bolts. If needed, medium thread locker can be used.
    • Step Three: Insert Fire Extinguisher of choice into the QDP, compress foam strips, line up the holes for the 4” stainless steel pin and insert Pin into the pin holes of each ring.
    • Step Four: Run the 4” stainless steel pin in and out a couple times to insure proper operation.

     

    Check bolt torque at regular intervals, and don’t forget to post a review online