GM 2014-2018 Silverado F-MMP Instructions

GM MMP Installation Instructions

2014-2019 Chevy Silverado and 2014-2019 GMC Sierra

Any modifications to your vehicle are done at your own risk.

Tools Needed:

  • 3mm and 5mm Ball-End Allen Key or Socket

Installation Instructions:

  • Step One: When applicable, remove trim pieces at the seat base.
  • Step Two: Take each C Bracket and slide it onto the seat rail with the large threaded holes facing forward and down.
  • Step Three: Loosely affix multi mount panel to the front of the C Brackets with the provided buttonheads.
  • Step Four: Take the set screws and loosely thread them into the sides of each C Bracket.
  • Step Five: Reference product page on website for proper install and alignment.
  • Step Six: Press the assembly firmly onto the seat rails so its pushed back as far as possible. Tighten the set screws and buttonhead bolts. Do not overtighten set screws or buttonheads. - Check bolt torque at regular intervals and don’t forget to post a review. -