No Products in the Cart
New for 2021 is our long awaited Under Seat Compressor Mount. With the help of our Seat Jackers, this mount will allow you to mount any ViAir or ARB compressor under your driver or passenger seat. The Twin ARB will fit under the Tacoma or FJ passenger seat only. The Single ARB or ViAir (70 Series to 400 Series) will work on all compatible vehicles (either seat).
If you're like us and never liked the idea of mounting your compressor out in the elements, then this is for you. Our mount will allow you to have easy access to your compressor with out fumbling through your engine bay, truck bed, or rear cargo area.
Please note that when installing its important to zip tie all factory and compressor wiring under the seat away from the compressor to avoid damage.
**FRONT AND REAR SEAT JACKERS REQUIRED, AIR COMPRESSORS WILL NOT FIT OTHERWISE**
*The Twin ARB will not fit under any Driver Side seat or 4Runners.
FEATURES AND DETAILS:
Under Seat Compressor Mount w/Front and Rear Seat Jackers & Fittings
For those that do not have our Front and Rear Seat Jackers, this is the option you need. The fitting kit includes: 18" of DOT 1/4" air line, two 90 degree push fittings, quick connect, and bulkhead fitting. DOES NOT INCLUDE "T FITTING" FOR SINGLE ARB.
Under Seat Compressor Mount w/Front and Rear Seat Jackers
For those that do not have our Front and Rear Seat Jackers, this is the option you need.
Under Seat Compressor Mount - No Seat Jackers
This is for those that already have both Front and Rear Seat Jackers and just need the mount. THIS WILL NOT INSTALL OR PROVIDE CLEARANCE UNLESS YOU HAVE THE FRONT AND REAR SEAT JACKERS.
Under Seat Compressor Mount & Fittings - No Seat Jackers
This is for those that already have both Front and Rear Seat Jackers and just need to mount. The fitting kit includes: 18" of DOT 1/4" air line, two 90 degree push fittings, quick connect, and bulkhead fitting. DOES NOT INCLUDE "T FITTING" FOR SINGLE ARB. THIS WILL NOT INSTALL OR PROVIDE CLEARANCE UNLESS YOU HAVE THE FRONT AND REAR SEAT JACKERS.
I had to admit there was some hesitancy wiring the compressor up, but with some patience and persistence I got it wired up and it's awesome. works like a charm and looks slick. Great product.
Got it quickly. Will be using it as 2-amp tray for a sound system!
I got this to install an ARB air compressor underneath my passenger seat in my 2023 Tacoma. Fits and works PERFECTLY!!! Delivery was quick as well. I am extremely satisfied with my buying experience at Desert Does It!!!
Not a show stopper, but I had to use a heavy duty loctite to get the bulkhead fitting to seal. One of the mtg tabs on the bracket was bent and I had to bend it to get proper alignment with seat jackers.
I mounted an ARB 12V Twin Compressor under the driver seat (which is powered and heated) using this mounting bracket and the Seat Jacker Kit. After researching that this option may not be possible, I was determined to get it to fit. I ended up with 1-1/2" shimming in rear (thinnest shim not used) for minimal clearance with the powered seat in the lowest most bottom position. The seat is able to move Forward/Back and Tilts Forward and/or Back on the Slide Tracks. The wire connection harnesses located at the front of the seat (mounted to the Front Metal Guard Bracket) were relocated toward the rear of the seat as best as I could tuck them away after reconnection. The Seat Heater Module was also removed and tucked away near its original location. I bent the mounting tab a little for this module to help ensure its clearance. While checking for this clearance, I noticed my only concern regarding this install...
*** NOTE: ***
The ONLY ISSUE that I found is that the Front Metal Guard that protects the Seat Adjustment Driveshaft, and where the Wire Harnesses and Seat Heater Module were mounted, * WILL MAKE CONTACT * with the ARB Twin Compressor if the seat is adjusted back too far. For me at 5'-9", this is not really an issue but the clearance is <1" so there is not much room for adjustment. Along with the loss of leg room between the seat and the steering wheel, this mounting option may not be the best fit for all.